TDTU 600
Digital Transmitters |
||
Generals. The new TDTU 600 Transmitter is fully compatible with the international DTV standards (DVB-T, ATSC, ISDB, etc....) and suitable for SFN (Single Frequency Network) and MFN (Multi Frequency Network) applications.
Phase noise. Very low phase noise oscillators allow to optimize the BER and MER performances. Analog compatibility. The TDTU 600 Transmitter is also available in a correspondent analog version easily field upgradable to digital into the same rack or in dual-mode configuration locally and/or remotely selectable in analog/digital operation for maximum flexibility.
Filtering. Critical mask and non-critical mask filters available. |
||
TDTU 600
Digital Transmitters |
||
RF
Data:
Operating FrequencyRange 470 -860 MHz Output Power: TDTU 2 2 Wrms TDTU 10 10 Wrms TDTU 50 50 Wrms TDTU 100 100 Wrms TDTU 200 200 Wrms TDTU 300 300 Wrms TDTU 400 400 Wrms TDTU 500 500 Wrms TDTU 600 600 Wrms TDTU 900 900 Wrms TDTU 1200 1200 Wrms TDTU 1600 1600 Wrms TDTU 3200 3200 Wrms TDTU 6400 6400 Wrms Output connector: From 2 to 100 Wrms output power N (otherson request) From 200 to 400 Wrms output power DIN 7/16'' (otherson request) From 500 to 600 Wrms output power EIA 7/8'' (otherson request) From 900 to 1200 Wrms output power EIA 1+5/8'' (otherson request) From 1600 to 6400 Wrms output power EIA 3+1/8'' (otherson request) Output impedance 50 W Shoulder attenuation > 38 dB Output frequencyresponse ± 0.5 dB Network system adaptersincluded in digital modulator MFN or SFN DigitalModulator Data Inputs: Serial data input (BNC connector, 75 W) 2 ASI inputs (Optional four ASI inputs available on request) Clock reference input: Amplitude 100 mV 4 3 Vpp Frequency 10MHzwithin 1 PPM Connector type BNC Impedance 50 W/ >1 kW user selectable Time reference input, SFN timing: Amplitude 0 ÷ 5 V Frequency 1 PPS Transition Positive edge Connector type BNC Impedance 50 W / >1 kW internally configurable Digital Modulator Data Outputs: Center frequency output From 30 MHz to 1 GHz in 1 Hz steps Output Frequency stability 6 1 ppm Output Level stability 6 1 dB Frequency response 6 0.5 dB (ref. to centre frequency) IF Output return loss > 16 dB with 50 V Harmonics and Spurious < -56 dBc MER > 40 dB Spectrum Polarity Inverted / not inverted - selectable by front panel menu Output bandwidth 6-7-8 MHz Metering: Forward and reflected power, DC voltages and currents, inlet air and heatsink temperatures Alarms: VSWR, over temperature, cooling system failure, overdriving; Power supply: 115/208/230/240 Vac±10%, 47 to 62 Hz single-phase or 208/220/240/380/415±10%, 47 to 62 Hz, three phases Operating conditions: Cooling Forced air with axial fans Operating temperature -5° ÷ +45° C Humidity 95% max Weight: TDTU 2 105 kg TDTU 10 120 kg TDTU 50 122 Kg TDTU 100 128 Kg TDTU 200 158 Kg TDTU 300 164 Kg TDTU 400 184 Kg TDTU 500 188 kg TDTU 600 198 kg TDTU 900 405 kg TDTU 1200 440 kg TDTU 1600 520 kg TDTU 3200 790 kg TDTU 6400 1650 kg Size (WxHxD): TDTU 2 540x275x720 mm TDTU 10 540x405x720 mm TDTU 50 540x405x720 mm TDTU 100 540x405x720 mm TDTU 200 540x550x720 mm TDTU 300 540x550x720 mm TDTU 400 540x550x720 mm TDTU 500 540x550x720 mm TDTU 600 540x805x720 mm TDTU 900 540x805x720 mm TDTU 1200 540x1480x840 mm TDTU 1600 540x1480x840 mm TDTU 3200 540x1480x840 mm (2 cabinet) TDTU 6400 540x1480x840 mm (4 cabinet) |
||
ITEL S.r.l. TELECOMUNICATIONS AND BROADCASTING SERVICES Via Friuli, 6 - 33074 Fontanafredda (PN) - ITALY Tel. +39 0434 997667 - Fax. +39 0434 997687 |
||